RBHB-0502 - IDEC RBHB-0502 RELAY SOLID STATE 2AMP 50VDC 3-28VDC INPUT 4BLADE

RBHB-0502 - IDEC RBHB-0502 RELAY SOLID STATE 2AMP 50VDC 3-28VDC INPUT 4BLADE...

IDEC RBHB-0502 RELAY SOLID STATE 2AMP 50VDC 3-28VDC INPUT 4BLADE Simple Type: Relay

For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.

3V to 8V DC input signal voltage, 5V to 60V DC output load range
A photo-coupler ensures complete isolation between input and output terminals, resulting in high dielectric strength
An all solid-state design generates no arc, no chatter, no bounce, and no mechanical noise
Available in PC mount or plug-in models
Capable of high-speed and high-frequency switching with long life and excellent reliability
Input diode protection against reverse polarity
Sealed with epoxy resin for high resistance to moisture, shock, and vibration

General

Contact Configuration: SPNO (Form A); RBPP: 1 SPNO or 2 SPNO
Dielectric Strength: Between live parts: 2,000V AC, 1 minute; Between live and dead metal parts: 2,000V AC, 1 minute
Drop-out Voltage: 0.8V DC minimum
Impedance: Approximately 1.5k?
Insulation Resistance: 100MW minimum (measured with 500V DC megger)
Load Voltage Range: 5 to 60V DC
Maximum Load Current: 2A
Minimum Operational Current: 50mA
Off-State Leak Current: 2mA maximum
Operating Temperature: –25 to +80°C –30 to +80°C
Operating Time: 0.5ms maximum
Pick-up Voltage: 3V DC maximum
Reset Time: 2ms maximum
Storage Temperature: –30 to 100°C
Surge Current, 1 Cycle: 5A (1 second maximum)
Voltage Drop Output On: 1.5V rms
VOLTAGE RANGE: 3 to 28V DC